Firestop Panel
Firestop Panel  Fire Protection Coating Malaysia, Kuala Lumpur (KL), Selangor Supplier, Manufacturer, Supply, Supplies | Delta Sama Jaya Sdn Bhd
 View Catalogue / Print





FIRESTOPPING PANEL


 


Product Description

Our Firepro Ablative Coated Batts are manufactured by spraying high-density rockwool with a fire-rated ablative coating. The coated batts are simply cut and friction fitted between the services and the edges of the structure. The fire rated coating is used as an adhesive to bond sections of batt together into a barrier and to the surrounding structure. All joins in the batt are pointed in with FirePro Acoustic intumescent Sealant to form a monolithic layer. The ablative coated batt comes in 6 pieces per pack. 

*Plastic pipework would be needed to be sleeved with the FirePro Firestop Pipe Collars prior to installation of the FirePro Ablative Coated Batt. These must be mechanically fixed with steel angles, minimum 30mm x 30 mm x 1.6mm, or similar to the surrounding substrate. 

 

Product Features and Application
  • Up to 4 hours of fire rating
  • Simple installation 
  • Lightweight
  • Maintenance Free
  • Tested to Rw 57
  • Resist the passage of smoke
  • Suitable to make good around most types of servce penetrations

Service Penetration  Integrity Insulation  Numberof Layers
Concrete floor openings 4 hours *4 hours Single
Masonry floor openings 2 hours *2 hours Single
Gypsum board wall openings 1 hour *1 hour Dual 


*Services do not achieve insulation 
Minimum thickness of masonry wall - 100 mm
Minimum thickness of concrete floor - 150 mm
Minimum thickness of gypsum wall - 100 mm



 
Product Image


   

  




Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version