Cable cleats are devices designed and tested to ensure cables are supported, dressed and retain securely. These Cable Clamps also known as Cable Saddles have been installed in Electrical Substations, Power Plants, Oil and Gas Industries, Rail Systems, etc for many years in most part of the world. For more info please click on the Catalogue provided.

 View Catalogue / Print           Flyers           Website
 

Aluminium Alloy Single Cable Cleat
Aluminium Alloy Single Cable Cleat
Single Cable Cleat - Colour
Single Cable Cleat - Colour
Single Cable Cleats
Single Cable Cleats
Stainless Steel Single Cable Cleats
Stainless Steel Single Cable Cleats
Cable Slab also known as Cable Tiles, Cable Covers, Cover Plate or Cover Tape are used as visual warning indicator for cable laid underground, while at the same time provides mechanical protection for underground laid cables in the event of excavation works. The cable slabs are buried under the ground level and above the underground cables.

Our Cable Slabs are manufactured from specially formulated high quality engineered materials to provide the highest impact and tensile strength for the protection of underground cable or piping.

It’s ultimate interlocking linkage system will ensure the retention of the protection chain even under severe earth movement or impact. For more info please see the Catalogue provided.

 View Catalogue / Print           Flyers           Website
 

1 Hook - 100mm ( 4" ) Width Cable Protection Slab
1 Hook - 100mm ( 4" ) Width Cable Protection Slab
1 Hook - 150mm (6") Width Cable Protection Tiles
1 Hook - 150mm (6") Width Cable Protection Tiles
1 Hook - 200mm (8") Width Cable Protection Slab
1 Hook - 200mm (8") Width Cable Protection Slab
1 Hook - 250 mm ( 10" )  Width Cable Protection Slab
1 Hook - 250 mm ( 10" ) Width Cable Protection Slab
The Precast Concrete cable marker posts identify the exact location of underground utility services, including telecommunication cables, low (LV) and high (HV) voltage power cables - this includes 1 kV , 6.6kV, 11kV, 33kV 132 kV and 275 kV cable service identification.
VIEW / PRINT CATALOGUE
 

 


Concrete Cable Route Marker 每 Square
Concrete Cable Route Marker 每 Square
Cement Cable Marker 每 Round
Cement Cable Marker 每 Round
Concrete Cable Marker 每 Round
Concrete Cable Marker 每 Round
Concrete Joint Marker
Concrete Joint Marker
The Cable Identification system & accessories are the equipment used to label or marked the cables used. It is build with highly durable material that can withstand high-temperature and have high-durability.

 View Catalogue / Print

Optical Fibre Warning Labels
Optical Fibre Warning Labels
Solar Panel Warning Labels
Solar Panel Warning Labels
Endurance® Modular ID
Endurance® Modular ID
Endurance® External Grade Pipe Identification Tape
Endurance® External Grade Pipe Identification Tape
   
Exothermic Welding is a welding that employs molten metal to permanently join the conductors.This improves mechanical, electrical and anti-corrosion properties compared with any mechanical connection. Exothermic welding is the best way to make permanent, reliable and high conductivity connections for any installation requiring an earthing system.

  ANSI/NEMA CC1
  View Catalogue / Print


 
  Exothermic Welding Process”  is a process for joining two conductors, that employs
superheated copper alloy to permanently join the conductors.

The process employs an exothermic reaction of a copper thermite
composition to heat the copper and requires no external source of heat or current.

The weld formed has higher mechanical strength than other forms of weld,
and have excellent corrosion resistance.

It also does not increase electrical resistance over the lifetime of the installation.

 

 

Graphite Mold
Graphite Mold
Weld Metal Powder
Weld Metal Powder
Handle Clamp
Handle Clamp
Standard Exothermic Welding Tools
Standard Exothermic Welding Tools
BANDIMEX STAINLESS STEEL BANDING SYSTEM is a flexible band clamping system which is available in various widths and in two material grades to suit a broad range of applications and environments. One of the key benefits of this system is the fact that the production of individual, strong and tailor-made clamps elimates the need for a large stock of different sized clamps.
 
Using the Bandimex Tool, a roll of Bandimex Band and Bandimex Buckles, a clamp fitting each diameter and each shape can easily and quickly be applied at low cost. Bandimex continuous banding system connects clamps, fastens, secures or fixes hoses, pipes, cables, signs or boards.
 
All Banding has full rounded edge for protection when handling and can be double wrapped to provide almost 4 times the radial compression of single banding ideal for all those heavy duty applications.
 

 

Band SS-CrNiMo SS 316
Band SS-CrNiMo SS 316
Bandimex JUMBO-Band 每 SS-CrNi, 30 m/roll
Bandimex JUMBO-Band 每 SS-CrNi, 30 m/roll
12.7mm Width SS L Band
12.7mm Width SS L Band
19 mm Width SS L Band
19 mm Width SS L Band
Aerial bundle conductors’ accessory includes numerous items for installing bundle durable, long lasting conductors on posts/poles and facades of buildings, routing of power lines, and connection for public used. In addition, they can also be used as an entry into mini-substations and connection to power cables or bare wires at joints between long distance lines and bundle conductor lines.

 View Catalogue / Print           Website
 

ABC Accessories
ABC Accessories
HDG Steel pole 1
HDG Steel pole 1
Lighting Bracket 1
Lighting Bracket 1
P-CLIP / Stainless Steel Clamp C/W Liner
P-CLIP / Stainless Steel Clamp C/W Liner
Termination Kits are widely used around the world for cable termination at distribution voltage up to 36kV. The usage of termination kit - Raychem terminations have become identified with reliability because of their unparalleled long term performance where it really counts in the field. Raychem termination system is compatible with all type of armoured cables. For more info please see the Catalogue provided.
 
View / Print Catalogue
 

Indoor 3 Core XLPE / PVC Cables Up to 33kV Indoor Application
Indoor 3 Core XLPE / PVC Cables Up to 33kV Indoor Application
Indoor 3 Core XLPE / SWA / PVC Cables Up to 11kV
Indoor 3 Core XLPE / SWA / PVC Cables Up to 11kV
Outdoor / Indoor 3 Core XLPE / PVC Cables Up to 33kV Outdoor Application
Outdoor / Indoor 3 Core XLPE / PVC Cables Up to 33kV Outdoor Application
Outdoor 3 Core XLPE / SWA / PVC Cables Up to 22kV Indoor Application
Outdoor 3 Core XLPE / SWA / PVC Cables Up to 22kV Indoor Application
Heat Shrink Cable End Caps is used to seal the ends of all types of cables to protect from ingress of water/moisture. Heat shrink Sleeve or Tubing is a shrinkable plastic tube used to insulate wires, providing abrasion resistance and environmental protection for stranded and solid wire conductors, connections, joints and terminals in electrical work. For more info please see the Catalogue provided.

 View / Print Catalogue
 

 

Anti Tracking Insulation Tubing
Anti Tracking Insulation Tubing
Copper Wire Mesh
Copper Wire Mesh
Environment Friendly, Flexible Flame Retardant Heat Shrinkable Tubing Shrink Ratio
Environment Friendly, Flexible Flame Retardant Heat Shrinkable Tubing Shrink Ratio
Flexible, Thin Wall Flame Retardant Polyolefin Tubing Shrink Ratio
Flexible, Thin Wall Flame Retardant Polyolefin Tubing Shrink Ratio

Cable gland is a device designed to attach and secure the end of a cable to the equipment. It provides strain-relief and connects by a means suitable for the type and description of cable for which it is designed—including provision for making electrical connection to the armor or braid and lead or aluminum sheath of the cable, if any. Cable glands may also be used for sealing cables passing through bulkheads or gland plates. For more info please see the Catalogue provided.

View / Print Catalogue
 

Brass Cable Glands "CW" Type Single Compression
Brass Cable Glands "CW" Type Single Compression
Brass Cable Glands "E1W" Type - Double Compression Glands
Brass Cable Glands "E1W" Type - Double Compression Glands
Brass Cable Glands "A2" Type Single Compression ( For Un Armored cable)
Brass Cable Glands "A2" Type Single Compression ( For Un Armored cable)
PG Cable Gland (Metric-Thread)
PG Cable Gland (Metric-Thread)
Protect cables, cords, hoses and wires from heavy truck / vehicular traffic. These portable heavy duty cable protectors are constructed of high density rubber superior tear and abrasion resistance. The surface is a great for foot and wheel traction too.
VIEW / PRINT CATALOGUE
 

 


Cable Hump 2 Channel
Cable Hump 2 Channel
Cable Hump 5 Channel
Cable Hump 5 Channel
A cable tie is a type of fastener, for holding items together, primarily electric cables or wires. Because of their low cost and ease of use, tie-wraps are ubiquitous, finding use in a wide range of other applications. Stainless steel versions, either naked or coated with a rugged plastic, cater for exterior applications and hazardous environments. For more info please see the Catalogue provided.
View / Print Catalogue
 

Cable Tie
Cable Tie
Cable Ties - Black (use for jointing cable slab)
Cable Ties - Black (use for jointing cable slab)
Cable Ties - Black UV-Resistant (Nylon)
Cable Ties - Black UV-Resistant (Nylon)
Cable Ties - Nylon
Cable Ties - Nylon
Cable Connector or Cable Lug or Cable Terminal is a device that is used to join two or more electrical circuits together is called an electrical connector. These electrical connectors are typically utilized to set up temporary connections, though some may be used to install permanent ones. Electrical connectors are definitely a significant part of modern day devices. For more info please see the Catalogue provided.
View / Print Catalogue
 

Cable Connector
Cable Connector
Cable Laying Accessories are the equipment used in the cable installation. it is used to ease the installation, prevent injury to the workers and also prevent damages on the installed cables. The accessories are based on the type of cables. Made using the best quality material, the cable accessories are built to handle the job. For more info please see the Catalogue provided.

 View Catalogue / Print     

 

Cable Jack with Shaft
Cable Jack with Shaft
Cable Jack with Shaft
Cable Jack with Shaft
Cable Pulling Lubricant
Cable Pulling Lubricant
Cable Roler (Triple Corner Type)
Cable Roler (Triple Corner Type)
Earthing accessories are designed to protect cables and components from damage caused by sudden electrical power surges. Its main purpose is to reduce the risk of dangerous electrical shocks from uninsulated metal parts of an appliance. Our Earthing accessories is a solution that delivers effective life safety, together with long lasting and reliable protection.For more info please see the Catalogue provided
View Catalogue / Print          Website
 

Earthing Accessories
Earthing Accessories
Safety is the most important thing when working involving electrical. The Substation, Transmission, Distribution and Rail Safety Equipment provide the most suitable safety equipment to be used at the specific jobs. With safety as our priority, all equipment are build with the best quality materials to prevent and lower the injury.For more info please see the Catalogue provided.

Download/Print Catalog :-

PORTABLE EARTHING EQUIPMENT FOR SUBSTATION
PORTABLE EARTHING EQUIPMENT FOR TRANSMISSION
PORTABLE EARTHING EQUIPMENT FOR DISTRIBUTION

 

Substation Line End Clamps
Substation Line End Clamps
Substation Operating Sockets
Substation Operating Sockets
Substation Operating Poles
Substation Operating Poles
Substation Aluflex Leads
Substation Aluflex Leads
The Voltage Detector is a device that are used to determines the presence/absence of an electrical charge in an object. An electrical worker uses the voltage detector to determine which power lines are live, which keep him safe, and which help him do his job accurately and efficiently.
View / Print Catalogue

Substation Voltage Detector
Substation Voltage Detector
DS/MS/VA Voltage Detectors
DS/MS/VA Voltage Detectors
Beacon Voltage Detectors
Beacon Voltage Detectors
MD Proving Unit
MD Proving Unit
Safety is the priority when working on the Railway Electrical System. The Portable Earthing Equipment For Railway provide the most suitable safety equipment to be used at the specific Railway jobs. With safety as our priority, all equipment are build with the best quality materials to prevent and lower the injury.For more info please see the Catalogue provided.
VIEW / PRINT CATALOGUE

Website

 


DEP Rail Earth
DEP Rail Earth
Interlocked Long Blue Earths
Interlocked Long Blue Earths
Rail Operating Pole Kit
Rail Operating Pole Kit
J1 17-D Rail Clamp
J1 17-D Rail Clamp
Electric Arc Flash Safety Equipment
 
When working involving Electrical Arc Flash, safety is the main concern. The Electrical Arc Flash Protection provide the most suitable and unparalleled safety protection from the head-to-toe burn protection of the thermal effect of an Arc Flash. With safety as our priority, all equipment are build with the best quality materials to prevent and lower the injury. For more info please see the Catalogue provided.

 

Electric Arc Flash Safety Equipment
Electric Arc Flash Safety Equipment
It is important to ensure the safety when working with electrical on high place. The Fibreglass Ladder does not conduct electricity, which provide safety when working with high voltage power lines, low voltage power lines or other overhead live sources of electricity. With safety as our priority, all equipment are build with the best quality materials to prevent and lower the injury. For more info please see the Catalogue provided.
VIEW / PRINT CATALOGUE

 

Safety Fibreglass Ladder
Safety Fibreglass Ladder
Sulfur Hexafluoride (SF6) gas is widely used as electrical and insulating material for many years. The SF6 Gas equipment & Accessories provide the needed to check and detect the gas from leakage. For more info please see the Catalogue provided.
View / Print Catalogue
 

LEAK DETECTOR (400ML) WATER BASED
LEAK DETECTOR (400ML) WATER BASED
LEAK DETECTOR (500ML) WATER BASED
LEAK DETECTOR (500ML) WATER BASED
SF6 GAS FILLING DEVICE
SF6 GAS FILLING DEVICE
SF6 GAS LEAK DETECTOR
SF6 GAS LEAK DETECTOR
Switchyard Lighting provides area lighting illumination in substation switchyard access areas with sufficient intensity and clarity for safe movement of personnel and their vehicles. A feeder pillar provides local isolation to your electrical distribution equipment, protecting both the cabling and the transformer from faults. Feeder pillars allow simple and local maintenance to your equipment, reducing site downtime and reducing overall maintenance costs.
View / Print Catalogue

 

Switchyard Lighting & Feeder Pillar
Switchyard Lighting & Feeder Pillar
Transformer Accessories consist of transformer equipment used for transformer maintenance. These equipments mainly for safety as priority.
View / Print Catalogue

 

Buchholz Relays
Buchholz Relays
Oil Filtration Plug & Socket
Oil Filtration Plug & Socket
Transformer Oil Sampling Bottle (For Transformer Oil Sampling)
Transformer Oil Sampling Bottle (For Transformer Oil Sampling)
Transformer Silica Gel
Transformer Silica Gel
A safety sign is one which gives a specific message to those who may be exposed to hazards in the work environment. They may be to prevent accidents, signify health hazards, indicate the location of safety and fire protection equipment, or for giving guidance and instruction in an emergency. Lockout-tagout (LOTO) or lock and tag is a safety procedure which is used in industry to ensure that dangerous machines are properly shut off and not able to be started up again prior to the completion of maintenance or servicing work.
View Catalogue / Print          
 

Safety Signage & Locks
Safety Signage & Locks

The application of fire protection cable coating will significantly contribute to your fire safety and cost saving efforts. Our cable coating systems have been tested from the North Sea and throughout the Middle East to Indonesia. An investment in the longevity of electrical cables is an investment in secure performance and an insurance against production/operation shutdown.
View Catalogue / Print

Website

 

Fire Protection Coating
Fire Protection Coating
A cable tray system is used to support insulated electric cables used for power distribution and communication. Cable trays are used as an alternative to open wiring or electrical conduit systems, and are commonly used for cable management in commercial and industrial construction. For more info please see the Catalogue provided.

CABLE TRAY

METAL FRAME

 

Cable Ladder
Cable Ladder
Cable Tray
Cable Tray
STRUT CHANNEL & METAL FRAMING
STRUT CHANNEL & METAL FRAMING
Wire Mesh Tray
Wire Mesh Tray
Coming Soon
Coming Soon
Solar Cleaning Solution
Solar Cleaning Solution
Solar Flashing Light
Solar Flashing Light
Solar Led Floodlight
Solar Led Floodlight
Switch To Desktop Version