Handle Clamp (HCC, HCD, HCC-X, HCD-X and HCB-X)
Handle clamp is one of the important accessorries used to securely lock the graphite mold together.
The clamp will keep the graphite mold together without opening until the welding process is completed. It can be
unlocked easily after completion of work.
There are many types of the handle clamp which is suitable for each type of graphite mold such as Type HCC , HCD (most
common ) , HCB , HCC-X and HCD-X.
Type a) HCC Clamp
b) HCD Handle Clamp
Type HCC handle clamp are use with 85 x 85 x 120 mm up to 82 x 110 x 170 mm. size mold and can be used to weld 16-150 mm2
of conductor /cable.
Type HCD handle clamp are use with 110 x 110 x 190 mm or bigger size mold and can accomodate conductor/cable connection of
size 185mm2 and above.
Type c) HCC-X Handle Clamp
d) HCD-X Handle Clamp
This code is used with chain ''X'' to Clamp the same mold size of code: HCC and HCD.
These types will hold the mold in two directions, i.e. horizontal and vertical position.
Type HCB-X Handle clamp
This code is used with chain ''X'' to clamp 62 x 62 x 110 mm up to 62 x 62 x 130 mm size mold and
can be used to connect to sling wire with earthing rod/ pipe / sprinks of 50 mm.sq. size area.